£0.00(0 Items)
Seachem PhosGuard Phosphate Remover rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater.
PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow. It outperforms all competing products.
DIRECTIONS: For best results, PhosGuard should be placed so as to maximize the flow of water through it. It may be used in a canister filter, box filter, or any high flow area of a trickle filter. In some situations it may be necessary to use in a filter bag. Use 250mL for every 300 ltrs.
Leave product in place for 4 days, then test phosphate or silicate concentrations. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuard, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted.
Each 500ml of PhosGuard treats over 600ltrs (i.e. will remove up to 30 mg/L phosphate in 600 Ltrs of water, depending on the initial phosphate/silicate concentrations and the current biological load.
Over treating is not recommended. PhosGuard is not an exchange resin, it does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.
Read More >
Phosphate Remover 500mlCODE: MED-M010 | Only 0 Left in Stock | Web Price Only |
£16.20 |
Back to Phosphate Removers
Seachem PhosGuard Phosphate Remover rapidly removes phosphate and silicate from marine and freshwater aquaria. It is not recommended for phosphate buffered freshwater.
PhosGuard is highly porous for high capacity and bead-shaped for optimum water flow. It outperforms all competing products.
DIRECTIONS: For best results, PhosGuard should be placed so as to maximize the flow of water through it. It may be used in a canister filter, box filter, or any high flow area of a trickle filter. In some situations it may be necessary to use in a filter bag. Use 250mL for every 300 ltrs.
Leave product in place for 4 days, then test phosphate or silicate concentrations. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuard, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted.
Each 500ml of PhosGuard treats over 600ltrs (i.e. will remove up to 30 mg/L phosphate in 600 Ltrs of water, depending on the initial phosphate/silicate concentrations and the current biological load.
Over treating is not recommended. PhosGuard is not an exchange resin, it does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.
UK Mainland deliveries only; including England, Wales and some regions of Scotland.
We offer free standard delivery on Seachem PhosGuard Phosphate Remover to the UK Mainland for most orders that are over £50* (see exclusions below). Items that are considered larger than average will incur a delivery charge. Similarly, orders under £50 and are considered smaller items, will incur a delivery charge of £3.49 or £4.95 to UK Mainland.
*Larger items that are over 1 metre in length are subject to additional charges for certain areas – you will be notified if this is the case when you add the items to your basket. When you proceed to check out, then implement your delivery address and details, there will be a message explaining whether your postcode incurs extra costs before any money is taken. You can, however, email us if you have an issue with your Seachem PhosGuard Phosphate Remover order.
See here for further details on delivery to remote areas.
In the unfortunate event of unwanted items, you have 14 days to return with a receipt. The Seachem PhosGuard Phosphate Remover must be intact, and in complete resalable condition. A refund will not be issued until our checks determine that it is still brand new and unused. The cost of returning the {Product name} falls on the customer, unless there has been an issue on our end.
In the unlikely event of faulty items, you have 30 days to return the Seachem PhosGuard Phosphate Remover and even longer for items with manufacturer’s guarantee. Proof of purchase must be received in order to obtain a refund or exchange. However, this excludes damages caused by accidents, neglect or misuse of the Seachem PhosGuard Phosphate Remover. Tests will be conducted to see if the item is faulty; if not there will be a £18 charge for the redelivery of the item and to cover testing costs for a non-faulty item. Smaller items are subject to a normal delivery charge, plus an admin fee if found not to be faulty.
You can email or call us if you have a return query...Read More
Tropic Marin Bio-Magnesium 450g
£9.99
Sign up to receive the latest offers & news