£0.00(0 Items)
Metric Pressure Compression Bulkhead / Tank Connector.
This fitting will allow the pipe to pass straight through the middle of the fitting and is sealed with a tapered seal and lock nut, you can then simply connect to the pipe.
The tank connector also comes with a rubber washer, slip washer, and a flat nut to seal to the tank or container. Click 'Read More' before ordering
The bulkhead will fit close to what ever it is fitted to and will only stick up about 3 to 5mm depending on size used.
Solvent Weld
Product Size Information;
20mm Tank Connector ; 20mm i/d
Hole size needed for the threaded end in a drilled glass tank = 26.5mm min / 32mm max
25mm Tank Connector; 25mm i/d
Hole size needed for the threaded end in a drilled glass tank = 33.5mm min / 40mm max
32mm Tank Connector; 32mm i/d
Hole size needed for the threaded end in a drilled glass tank = 42mm min / 50mm max
40mm Tank Connector; 40mm i/d
Hole size needed for threaded end in a drilled glass tank = 53.5mm min / 65mm max
50mm Tank connector ; 50mm i/d
Hole size needed for threaded end in a drilled glass tank = 60mm min / 70mm max
Note. Metric pressure fittings, will not fit standard UK metric waste fittings. Please see our pond section for standard UK fittings
To see more in our range of pvc metric pressure fittings and pvc pipe please see Metric Solvent Weld Pressure Pipe And Fittings
* Please see the following link for a guide on size / classification of pipework & plumbing fittings if you need help to determine the size you require
Pipe Size Dimensions
20mm Metric Pressure Compression BulkheadCODE: MPTA-B001 | Only 8 Left in Stock | Web Price Only |
£12.95 WAS £13.90 |
||
25mm Metric Pressure Compression BulkheadCODE: MPTA-B002 | Only 6 Left in Stock | Web Price Only |
£13.95 WAS £14.95 |
||
32mm Metric Pressure Compression BulkheadCODE: MPTA-B003 | Only 5 Left in Stock | Web Price Only |
£16.75 WAS £18.30 |
||
40mm Metric Pressure Compression BulkheadCODE: MPTA-B004 | Out of Stock | Web Price Only |
£18.90 WAS £20.15 |
Out of Stock | |
50mm Metric Pressure Compression BulkheadCODE: | Only 5 Left in Stock | Web Price Only |
£32.99 WAS £34.85 |
Back to Metric Fittings
Metric Pressure Compression Bulkhead / Tank Connector.
This fitting will allow the pipe to pass straight through the middle of the fitting and is sealed with a tapered seal and lock nut, you can then simply connect to the pipe.
The tank connector also comes with a rubber washer, slip washer, and a flat nut to seal to the tank or container. Click 'Read More' before ordering
The bulkhead will fit close to what ever it is fitted to and will only stick up about 3 to 5mm depending on size used.
Solvent Weld
Product Size Information;
20mm Tank Connector ; 20mm i/d
Hole size needed for the threaded end in a drilled glass tank = 26.5mm min / 32mm max
25mm Tank Connector; 25mm i/d
Hole size needed for the threaded end in a drilled glass tank = 33.5mm min / 40mm max
32mm Tank Connector; 32mm i/d
Hole size needed for the threaded end in a drilled glass tank = 42mm min / 50mm max
40mm Tank Connector; 40mm i/d
Hole size needed for threaded end in a drilled glass tank = 53.5mm min / 65mm max
50mm Tank connector ; 50mm i/d
Hole size needed for threaded end in a drilled glass tank = 60mm min / 70mm max
Note. Metric pressure fittings, will not fit standard UK metric waste fittings. Please see our pond section for standard UK fittings
To see more in our range of pvc metric pressure fittings and pvc pipe please see Metric Solvent Weld Pressure Pipe And Fittings
* Please see the following link for a guide on size / classification of pipework & plumbing fittings if you need help to determine the size you require
Pipe Size Dimensions
UK Mainland deliveries only; including England, Wales and some regions of Scotland.
We offer free standard delivery on Metric Pressure Compression Bulkhead to the UK Mainland for most orders that are over £50* (see exclusions below). Items that are considered larger than average will incur a delivery charge. Similarly, orders under £50 and are considered smaller items, will incur a delivery charge of £3.49 or £4.95 to UK Mainland.
*Larger items that are over 1 metre in length are subject to additional charges for certain areas – you will be notified if this is the case when you add the items to your basket. When you proceed to check out, then implement your delivery address and details, there will be a message explaining whether your postcode incurs extra costs before any money is taken. You can, however, email us if you have an issue with your Metric Pressure Compression Bulkhead order.
See here for further details on delivery to remote areas.
In the unfortunate event of unwanted items, you have 14 days to return with a receipt. The Metric Pressure Compression Bulkhead must be intact, and in complete resalable condition. A refund will not be issued until our checks determine that it is still brand new and unused. The cost of returning the {Product name} falls on the customer, unless there has been an issue on our end.
In the unlikely event of faulty items, you have 30 days to return the Metric Pressure Compression Bulkhead and even longer for items with manufacturer’s guarantee. Proof of purchase must be received in order to obtain a refund or exchange. However, this excludes damages caused by accidents, neglect or misuse of the Metric Pressure Compression Bulkhead. Tests will be conducted to see if the item is faulty; if not there will be a £18 charge for the redelivery of the item and to cover testing costs for a non-faulty item. Smaller items are subject to a normal delivery charge, plus an admin fee if found not to be faulty.
You can email or call us if you have a return query...Read More
Tangit Solvent Weld Pressure Pipe Glue
£12.95
Weld On Wet R Dry Solvent Weld Cement Glue 240ml
£16.40 was £18.30
Pvc Metric Pressure Pipe Tank Connector / Bulk Head
£10.65
Metric PVC Pressure Double Union Ball Valve
£10.35
Sign up to receive the latest offers & news