Gold Label Pond Paint 5ltr Clear

No primer needed

2 coats only (on smooth surface)

Can be applied to ‘damp’ surfaces

Water based, so less hazardous

Quicker pond refill

Easy tool clean-up

Packed in easy-to-mix bucket

Easy to apply with brush, roller or spray

40sq.mtr / 5ltr coverage (on smooth surface)

Instructions for Gold Label Aqua Pond Paint:

Before painting check your surfaces for imperfections, cracks etc and fill where appropriate.

For large cracks in the concrete, vee out the cracks to approx 10mm - make sure the surface to

be bonded is solid and dust free. Fill with Gold Label Pond & Aquarium Sealer. Painting can then

commence immediately. Although Aqua Pond Paint is much safer than normal resin systems, it is

recommended you should avoid contact by using barrier cream or gloves. Any splashes should

be washed off with soap and water.

Method of use

DO NOT apply in temperatures below 10°C

Add the hardener in the top unit to the paint in the bottom unit and stir throughly, making sure it is

completely mixed - VERY IMPORTANT - stir for a minimum of 2 minutes.

PLEASE NOTE - Once mixed, the paint is usable for 1.5 hours in ambient temperatures. Over

20°c the working time will be reduced.

After mixing, apply immediately by brush, roller or spray. Ensure the coating is worked into the

corners etc. Apply minimum of 2 coats. The second coat can be applied when the first is touch dry

after approx 6-8 hours at 20°c. The same for any subsequent coats.

The paint will cure hard in 12 hours and full cure in 3-7 days, depending on atmospheric conditions.

When fully cured, wash the painted surface and drain before final fill.

No primer needed

2 coats only (on smooth surface)

Can be applied to ‘damp’ surfaces

Water based, so less hazardous

Quicker pond refill

Easy tool cleanup

Packed in easytomix

bucket

Easy to apply with brush, roller or spray

40sq.mtr / 5ltr coverage (on smooth surface)